 |
| Raw Silk |
The short fibers in raw silk fabric give it a rough texture that may require a dyer to dye the fabric several times to produce a uniform color. The industrial method of dyeing silk by silk supplier relies on a large piece of material preparation to absorb the color, but dyeing an individual wedding dress requires attention to detail. In either case, the type of dye used, synthetic or natural, will determine the amount of time a dye job takes and color results.
Properties of silk
Raw silk by silk supplier is silk in its natural state but without the protective gum removed, this is what gives silk its texture and dullness. The silkworm cocoon is covered in sticky gum that holds it together. The cocoon should be dipped in hot water to loosen the gum before it unwinds but does not get soaked because this will remove the gum completely and ruin the raw texture of the thread.
Colorants
Chemical and natural dyes are used to color raw silk fabric by silk supplier. Natural dyes are made up of a variety of plant substances, depending on the color; For example, indigo silk dyes a deep blue color. These dyes have long drying times and take time for multiple dye baths, but the natural substances are safe for the skin and produce rich colors.
Synthetic dyes are made from a mixture of chemicals that dye the fabric and color. Synthetic dyeing does not require that long, due to the dryness and set of components added to the coloring substance. Although the process is faster, the chemicals can have irritants that can cause a reaction in certain skin types.
The raw silk dyeing process
Industrial piece-die, the process of dying pieces of fabric, feeds pieces of fabric into a dye bath through two cylinders or secures to a jig that immerses the fabric in the dye bath. But the process of dying already built individual pieces, like a wedding dress, depends on the dyer.
One method dips the dress in a large tub of dye, the dress can be dipped several times to ensure that the color absorbs evenly. The temperature of the dye bath is tightly regulated so as not to overheat and remove the rubber from the material, but stay hot enough to loosen the fibers for absorption of the dye.
Complications with dyeing silk wedding dresses
 |
| Raw Silk Supplier |
A loose piece of silk will dye well, but the complicated construction of a wedding dress can pose problems in the dyeing process. For example, any bunching, pleating, or detailing on the dress can inhibit the dye from reaching the fabric.
A professional dry cleaner achieves these trouble spots using hand-dyeing techniques and dipping the dress in dye several times. Due to raw silk material costs and the particular needs of your dress, it is a good idea to test a sample piece of fabric before having your dress dyed.
No comments:
Post a Comment